Everbilt Sprinkler Pump

Sprinkling my lawn has always been a labor of love. I take pride in having the greenest grass on the block, but lugging around hoses and sprinklers took more time and effort than I cared for. I knew there had to be an easier way to keep my grass pristine. That’s when I decided it was time to invest in an Everbilt sprinkler pump to automate my watering system.

Little did I know that shopping for the right pump would become an epic quest! There were so many factors to consider that I hadn’t even thought of at first. Over the past few months, I’ve learned more about sprinkler pumps than I ever expected, and now I can confidently share my buying guide for these useful devices. Join me as I recount the trials and triumphs of my journey to find the perfect Everbilt sprinkler pump!

Specifying My Needs

My lawn is about a half-acre, so I knew I would need a pump with decent power to push water through all the sprinkler heads. I also have a mix of shrubs, flower beds and grass, so flexibility in water coverage was important too.

Of course, I needed something reliable that wouldn’t burn out after one season. Longevity and durability were top priorities, even if that meant spending a bit more upfront. And who wants to deal with a noisy pump disturbing the peace? Quiet operation was a must as well.

I did some initial research online to get an idea of what specifications I should look for. Based on the size of my yard, experts recommended around a 3/4 HP pump with a flow rate of 60-80 GPM. Single stage centrifugal pumps seemed ideal for residential use.

Now that I had a general sense of capacity and power, it was time to start shopping around!

Perusing the Possibilities

I headed to my local home improvement store and was overwhelmed by the options. There were cheap off-brand pumps with questionable quality. There were high-end professional models way overkill for my needs. And there were so many technical details to analyze and compare.

After browsing for a while, I zeroed in on the Everbilt line. I liked that they offered pumps in different power sizes and prices to fit my budget. The brand seemed geared specifically towards residential use compared to industrial-grade pumps.

They had everything from small 1/2 HP models to more robust 3/4 and 1 HP offerings. I noted my preferred flow rate, power type, and other key factors so I could match them up to Everbilt’s selection.

The store had literature for each model that provided specs and features. This let me cross-check pumps against my needs. I snapped some photos on my phone so I could mull over the options at home.

Decision Time

After reviewing the pamphlets and specs for each Everbilt pump, I finally decided on the 3/4 HP cast iron model.

Here’s what sealed the deal for me:

• 3/4 HP motor: Plenty of power for my lawn size without going overboard.
• 60 GPM: Optimal flow rate for operating multiple sprinkler heads.
• Cast iron construction: More durable and corrosion resistant than plastic.
• Single stage: Efficient for residential use and quieter than multi-stage pumps.
• 8 ft power cord: Enough length to give me flexibility in placement.

Of course I couldn’t ignore the price – $259 seemed very reasonable compared to similar pumps. And Everbilt offers a 2-year limited warranty for peace of mind.

I was thrilled to find a pump that perfectly matched my sprinkler system’s needs and my budget. Now it was time to get it home and set up!

Installation Day

Installation day finally arrived and I was eager to get my new Everbilt pump up and running. The manual indicated that choosing the right location was crucial for proper operation.

I cleared a level spot close enough to my home’s outdoor faucet for the 8 ft power cord to reach. But I made sure it was far enough away that the pump noise wouldn’t bother us inside.

Next came the fun part – connecting everything together! I attached the garden hose adapter to my faucet, then ran the intake hose from the pump inlet to the adapter.

For the output side, I connected PVC pipes from the pump discharge to my sprinkler control valves. I did have to pick up a few extra fittings and clamps from the hardware store for a perfect fit.

Once the plumbing was in place, I plugged in the power cord. The moment of truth had arrived! I turned on the faucet and the pump roared to life as water started flowing through the system.

Success! The pump primed itself quickly and maintained steady water pressure to all zones. I carefully inspected for leaks and found just a few loose clamps to tighten.

Seeing that powerful stream spraying from the sprinklers, I knew this Everbilt workhorse was up for the task of taming my thirsty lawn. The grass doesn’t stand a chance!

Keeping It Going Strong

Now that my sprinkler pump is installed and running smoothly, it’s important to perform regular maintenance to prevent problems down the road. The owner’s manual recommends inspecting and cleaning the pump before first use each season.

I’ll start by checking and changing the oil in the pump housing to make sure contaminants haven’t built up. Replacing the seals and bearings periodically will also help it run more efficiently.

The pump’s intake screen and in-line filter are bound to collect debris over time and restrict water flow. I’ll give those a good rinse annually before kicking off sprinkler season.

It’s also critical to winterize the system properly. I’ll drain all water from the pump body and hoses. Adding RV antifreeze will prevent residual moisture from damaging internal parts over the cold months.

With just a little yearly TLC, this hardy Everbilt pump should give me many more years of reliable service. A worthy investment to nourish my lawn for seasons to come!

Troubleshooting Problems

A few weeks into using my new sprinkler pump, I noticed the pressure sputtering and grass not getting fully saturated. Uh oh, something wasn’t right!

Out came the owner’s manual again, now carefully bookmarked and highlighted for troubleshooting tips. Here are the likely issues I might encounter and how to fix them:

No prime: Pump runs but no water flows. Check for airlock in the intake hose. Sometimes “jogging” the pump will eliminate it.

Insufficient pressure: Clogged filter screens are usually the culprit. Remove debris and rinse thoroughly.

Leaking: Tighten any loose clamps or fittings. Replace worn gaskets or seals if needed.

Overheating: Make sure the pump isn’t straining from lack of water flow. Let it cool off before restarting.

Loud noise: Worn bearings can cause rattling. Have a repair shop replace bearings and seals.

For my pressure problem, I cleaned the intake filter and discovered quite a bit of gunk clogging the mesh. A good rinse restored full pressure, and I made a note to check it more regularly going forward.

Having the right information on hand makes solving issues a breeze. I’m feeling prepared to handle anything that arises with my Everbilt pump.

Upgrade Considerations

While my current Everbilt pump handles our lawn’s needs admirably, I’ve contemplated upgrading to a more powerful model. As our landscaping continues to grow, the demand on the pump increases.

Stepping up to a 1 HP pump would give me some extra flow capacity down the road. It could support additional sprinkler zones if we expand the grass area or plant new gardens.

Some 1 HP Everbilt models offer added perks like dual voltage motors. This would let me switch between 115V or 230V power for more efficiency. An integrated pressure switch provides automatic on/off activation as needed.

I’d also gain booster pump capabilities to use water from additional sources. This lets me draw from rain barrels or other irrigation lines if needed.

The 8 ft power cord on my current pump limits placement options. Upgrading to a 20 ft cord would allow me to locate the pump father away from outdoor faucets.

While I don’t necessarily need these upgrades yet, it’s good to know Everbilt offers higher capacity pumps when the time comes. I’m sure my landscaping needs will continue to grow right along with my lawn!

Satisfied at Last

Who knew choosing a simple sprinkler pump could be such an epic challenge? After months of research, budgeting, and hands-on work, I’m proud to have successfully installed and maintained my Everbilt pump.

Every time I hear its steady hum drawing water and soaking my lawn, I’m reminded that finding the right model was well worth the effort. My grass has never been more vibrant!

For anyone considering an investment in these hardworking water pumps, I hope my buying guide distills the key factors to focus on. Do your homework, match the specifications to your needs, and you’re sure to find the perfect Everbilt pump to keep your yard thriving for years to come.

My quest for the ideal sprinkler pump ended in victory. Let my journey help lead you to irrigation success!