Everbilt Sump Pump 1/3 Hp

Having a properly functioning sump pump is crucial for any homeowner worried about flooding and water damage. As someone who just purchased a house in a flood-prone area, I did a ton of research to find the best sump pump option to keep my basement dry. After comparing numerous models and brands, I ultimately decided on the Everbilt 1/3 HP Sump Pump.

In this comprehensive guide, I’ll walk you through everything I learned during the process of selecting, buying, installing, and maintaining my new Everbilt sump pump. Whether you’re looking to buy your first sump pump or replace an aging one, this guide will provide you with all the key facts to make an informed decision.

Specifications and Capabilities of the Everbilt Sump Pump

The Everbilt 1/3 HP model I chose has a powerful 1/3 horsepower motor capable of pumping up to 45 gallons per minute and 3000 gallons per hour. With a 8.5 foot lift range, it provides enough power to discharge water well away from my foundation.

This sump pump is designed for vertical discharge configurations and comes standard with a 16 foot power cord. It can handle both effluent and clear water applications in temperatures up to 104°F. The thermoplastic construction resists corrosion and abrasion.

Some of the key specs at a glance:

• Horsepower: 1/3 HP
• Voltage: 115V
• Maximum Head: 8.5 feet
• Capacity: 45 GPM, 3000 GPH
• Power Cord Length: 16 feet
• Pump Dimensions: 6.3″L x 5.4″W x 10.5″H

With these robust capabilities, I felt confident this Everbilt sump pump could handle the drainage demands of my home. The 1/3 HP motor struck a nice balance between power and energy efficiency as well.

Where to Buy the Everbilt Sump Pump

I purchased my Everbilt sump pump from Home Depot for around $125. Home Depot offers free shipping or in-store pickup, which was convenient.

This specific model is sold exclusively through Home Depot. Other major retailers like Amazon and Lowe’s don’t carry it. However, you can often find it available from third party sellers on Amazon for a similar price.

Home Depot frequently runs promotions on Everbilt products, so it pays to keep an eye out for sales and discounts. I was able to save 10% by buying it during a holiday weekend promotion.

How to Install the Everbilt Sump Pump

Installing the sump pump was easier than I expected thanks to the detailed manual included by Everbilt. Here are the basic steps I followed:

1. Position the pump in the sump pit. Ensure the intake screen is submerged in water.
2. Attach the discharge pipe to the pump outlet. Secure it with the locking clamp.
3. Fasten the pump to the sump pit floor using the mounting feet. This prevents vibration and noise.
4. Connect the power cord to a properly grounded outlet.
5. Allow the pump to cycle on/off automatically as the float switch detects water levels.

The most important tips I learned were to position the pump off-center in the sump pit for optimal water intake, and make sure the discharge pipe slopes upward continually to prevent backflow issues.

How the Everbilt Sump Pump Works

The Everbilt sump pump uses a powerful 1/3 HP motor to drive an impeller which draws water into the unit through a filter screen. The spinning impeller pressurizes the water and pushes it out via the discharge pipe.

The pump turns on automatically when the water level rises high enough to trigger the vertical float switch. Once the water is pumped down and the float drops, the switch cuts power to the motor to stop it from running dry. This cycle repeats as needed to keep the sump pit drained.

A built-in overload protector shuts off the motor if it overheats from extended run times or jammed impellers. The protector resets automatically once the motor cools.

Maintenance Tips to Extend the Life of Your Everbilt Pump

To keep my Everbilt sump pump running smoothly for years to come, I make sure to perform regular maintenance:

• Check the inlet screen – Remove debris so it doesn’t clog and reduce water intake.
• Test the float switch – Verify it’s rising/dropping appropriately to activate the pump.
• Inspect the discharge pipe – Check for cracks or leaks allowing backflow of water.
• Clear sediment buildup – Periodically clean out silt that accumulates in the sump pit.
• Listen for odd noises – Unusual sounds can indicate worn or failing parts.
• Replace the check valve – Check valves wear out over time, so replace this every 2-3 years.
• Consider backups – I installed a battery backup system for power outages when the pump is most needed.

Staying on top of these simple maintenance practices will help prevent problems and keep my Everbilt sump pump running optimally for maximum protection.

Frequently Asked Questions about Everbilt Sump Pumps

How much does the Everbilt 1/3 HP sump pump cost?

The Everbilt 1/3 HP sump pump retails for around $125 at Home Depot. Sales and promotions can bring the price down to around $100 at times.

What is the warranty period?

Everbilt offers a 2-year limited warranty covering defects in materials and workmanship. The warranty does not cover normal wear/tear or improper use.

How long can I expect the pump to last?

With proper maintenance and usage within its specifications, the Everbilt pump should have a service life of 4-6 years. Heavy use can shorten this lifespan.

Does it come with any accessories?

The Everbilt pump includes the power cord, discharge fittings, mounting feet, and screen filter. Optional accessories like check valves and backup batteries must be purchased separately.

How does the quality compare to competing sump pump brands?

For the price, the Everbilt sump pump offers high quality and reliability on par with more expensive brands like Zoeller and Liberty Pumps. The thermoplastic construction resists corrosion better than cast iron pumps.

What kind of customer reviews does this pump get?

The Everbilt 1/3 HP sump pump earns strong customer reviews, averaging 4.5 out of 5 stars on Home Depot’s website. Owners praise its dependable performance and say it runs quieter than other budget sump pump models. Critical reviews focus mainly on premature failures, which seem uncommon.

Why I Highly Recommend the Everbilt Sump Pump

After installing the Everbilt 1/3 HP Sump Pump in my home, I’m confident it provides the pumping power and reliability I need to keep my basement dry, even during heavy rains. Based on my in-depth research and hands-on experience, I highly recommend Everbilt sump pumps for the following reasons:

• Powerful performance – The 1/3 HP motor provides ample lifting capacity and flow rate to discharge water quickly.
• Durable thermoplastic construction – Resists corrosion and abrasion for long service life.
• Cost-effective price – Reasonable upfront cost with impressive longevity and value.
• Reliable automated operation – Float switch turns pump on/off automatically as needed.
• Quiet operation – Runs very smoothly and quietly.
• Reputable brand – Everbilt is a trusted brand among homeowners and contractors.
• Great customer support – 2-year warranty and helpful customer service.

For anyone researching sump pumps, I hope this real-world guide gives you the facts and insights to determine if the Everbilt 1/3 HP model is the right solution for your home. I’m happy to answer any other questions you may have!